What is Evaporative Cooling?
As water is evaporated, energy is lost from the air, reducing the temperature. Two temperatures are important when dealing with evaporative cooling systems.
This is the temperature that we usually think of as air temperature, measured by a regular thermometer exposed to the air stream.
This is the lowest temperature that can be reached by the evaporation of water only.
When considering water evaporating into air, the wet-bulb temperature, as compared to the air's dry-bulb temperature, is a measure of the potential for evaporative cooling. The dry and wet bulb temperature can be used to calculate the relative humidity.
Evaporation will take place when the humidity is below 100% and the air begins to absorb water.
Any given volume of air can hold a certain amount of water vapour and the degree of absorption will depend on the amount it is already holding.
The term humidity describes how much water is already in the air; relative to the amount it is capable of holding. Air is saturated when it cannot hold any more water.
Imagine it as a sponge, if the sponge held half as much water as it was capable of holding, it would be 50% saturated. In the case of air, we would describe the Relative Humidity as being 50%.
Energy is required to change water from liquid to vapour. This energy is obtained in an adiabatic process from the air itself. Air entering an evaporative air cooler gives up heat energy to evaporate water. During this process, the dry bulb temperature of the air passing through the cooler is lowered.
Evaporative air conditioning uses evaporation to cool the air. In an evaporative cooler, such as Breezair, a pump circulates water from the reservoir on to a cooling pad, which in turn becomes very wet. A fan draws air from outside the unit through the moistened pad. As it passes through the pad the air is cooled by evaporation. The key to effective evaporative cooling is ensuring that each of the cooling pads are completely saturated at all times during operation and that the systems fan & motor are sized and designed to deliver the appropriate airflow for the home, office, factory or warehouse.
All Breezair units feature advanced technology and a range of clever design features that combine to achieve the highest cooling performance of any comparable air conditioner.
Evaporative Cooling is totally natural. Unlike conventional air conditioning systems, there are no harmful gases like chlorofluorocarbon (CFC) which could pollute the atmosphere. Evaporative air cooling allows for cleaner & healthier air because the air is 100% fresh. Toxic fumes, airborne dust and contaminants are flushed from the building, thus improving health and safety conditions.
Generally, installed evaporative air cooling costs up to 50% less than refrigerated systems and can cost up to 80% less to run. All of the evaporative air coolers which we distribute are designed for easy installation and are thus cheaper to install. An evaporative cooling system has very few working parts which means that there’s a low risk of failure. Cooling pads and water distributors are very easy to maintain.
The range of evaporative air-coolers which we distribute use up to 70% less energy than refrigerant based air conditioning. The reason evaporative air coolers are so energy efficient to run, is that unlike refrigerative systems, they don’t have an energy consuming compressor, which compress vapour and condense it back into liquid to repeat the cooling cycle. Instead, evaporative air coolers use fresh water to achieve highly efficient cooling.